Swisher 16 Cubic Feet ATV Poly Dump Cart #12007

Cheap Swisher 16 Cubic Feet ATV Poly Dump Cart #12007 Review

02-23-08-I received a cart model PB15-012. And review after seeing all the carts I have found that it appeared that the next time you need. 5 miles on forest paths and need a variety of axle distance, wide-angle to the trailer hitch ups'n'downs sharp, side-hill angle, light weight,
bearings vs. bushings, volume, axle distance, shaft thickness, shape,
body and frame and toughness to be a price.

I got a call that came from UPS, as well as arequest to call in to arrange a delivery time.

I called the next day and told them that I would like to come, and I understand that they do the "will-call.

I went for it the next day.

The people were friendly and openly expressed their "rejection" procedure. I asked about this, because so far all the so-called "ATV wagon / trailer" that I have been looking at some serious mistakes. I doubt that there was a real ATV trailer.


Given the number of carts that I took the view that the Model Swisher PB15-012, with a few exceptions, have the features listed above, that I needed.

I immediately began assembly and learned the following.

The pre-punched hole in the plastic body of a half-twist is also a wide
longitudinal framemembers. Worked, but first had to be pushed up to a 45 degree angle, then tightened in place. It seems that the manufacturer must put together such a, now that the site of the pre-drilled holes in the plastic bed moved.

-Missing one of the seven large washers used under the screw heads in the bed.

The two-axle dust caps, as advertised, is missing.

-A "closed bearings" seems a little confused. This was the first decent setI saw the wheel. I'ts true that the outer end of the bearings stand is close to the seemingly flexible dust cap. Missing, however, the spring clamp to keep the lid on, because it hardens, and sometimes loose and fall off.

I have a fat Zerka both wheels, but it is uncertain how any of these fats to ever move into the last of the plastic bearings, seals, bearings, which are typical.

-The fat will probably fill the spaceinside of the wheel, the roller bearings.

I do not, however, lacks a seal to protect the inner roller bearing water and dust, as a fat overweight. There is no inner seal. You mean the seal of the board of trailers.

The wheels, the inner and outer bearings pressed into them. It is easy enough to work in the shaft. When greasing zerks the fat starts to come out around the small space between the mating surfaces of the internalRace-to-the-axis. This will help the internal competition with the spin axis. Taking into account that there is no real bearing on the internal seal to keep out of the water (Das Boot) and dust it gives me chill to think of the possibilities here. I will have to monitor / maintain it, I can think of a way to invent a better seal, ie O-rings/rubber pads.

The lip of the 2 "trailer hitch is too excessive for UPS-N values that
I am going to go. Linked to the early, and do not allow the UPS-N-downnumber of travel, you should be. Someone in the company might have to go and experience some of the "Kelly Humps" to know that the real need for more use of an ATV tour of the tug. On the ground of the lips and a thin neck, I bring the ball-hitch use.

Do not forget that only some technical recommendations that I hope that Swisher takes over in the future.

The Swisher ATV vehicle / trailer is the best I could find. I recommend that anyone looking for such aWatch this car right ATV for outdoor in-the-mountain use.

Eldorado --

Swisher 16 Cubic Feet ATV Poly Dump Cart #12007 Feature

• Ruggedly designed to go where your ATV can go
• Easy tilting, Extra-tough, high-density poly ethylene cargo tub
• Large ATV Tires with 20" of ground clearance
• High speed sealed precision ball bearings
• Heavy duty 2" tubular steel frame with 2" receiver coupler

Swisher 16 Cubic Feet ATV Poly Dump Cart #12007 Overview

Swisher ATV Poly Dump Cart Trailer... 16 or 20 cu. ft. Transport and unload with ease... this Swisher ATV Poly Dump Cart Trailer is great for hauling firewood, landscaping materials, fencing supplies or almost anything else you need to get from one place to another: Ruggedly designed to go where your ATV can go Extra-tough, high-density poly box with tilt bed poly tub Large ATV tires with 20" of ground clearance High speed sealed precision ball bearings Heavy duty 2" tubular steel frame with 2" receiver coupler Quickly attaches to ATV with supplied 2" ball hitch coupler Quickly dump by removing quick release pin and lifting removable tailgate Extra long tow bar allows for sharper turning radius, while offering more space behind ATV rack for optional rack accessories Powder coat paint provides durable, ultra tough finish Some assembly required. 750-lb. capacity. Get yours now! Please Note: This item is shipped by commercial carrier curbside. Unloading is the customer's responsibility, including off the back of the truck. Ships in 1 box: 54" x 46" x 12", 100 lbs. No expedited delivery. High-value orders require a physical street address, otherwise insurance costs will be added to the shipping total. AVAILABLE SEPARATELY: Swisher 20 cu. ft. ATV Poly Dump Cart Trailer - word search in our Store for 'Swisher'. Swisher 16 cu. ft. ATV Poly Dump Cart Trailer



*** Product Information and Prices Stored: Mar 25, 2010 21:22:19